Presario 1600 Series
Models: 1683, 1685, 1687, 1688, 1690, 1692, 1693, and 1694
Before You Begin |
| Specifications |
| Parts Catalog |
|
|
|
|
|
|
|
|
|
|
Removal Sequence |
| Troubleshooting |
| Battery Operations |
|
|
|
|
|
|
|
|
| Index |
Product Description |
| Pin Assignments |
| |
|
|
|
|
|
Removal and Replacement
Prior to conducting any removal and/or replacement procedures, you should IMPORTANT: review and fully understand the section titled "Before You Begin".
Removal Replacing the Processor
Sequence
Cables and
Connectors
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drive
DVD or
CD Drive
Battery
Charger
Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Network
Interface
Card
Speaker
Assembly
Diskette
Drive
Fan
Assembly
System
Board
Dip Switch
Settings
Memory
Module
Previous Step
(Removing the Processor)
The notch on the upper left corner of the processor serves as an orientation indicator.
Align the IMPORTANT: notch on
the left corner of the processor with the notch on the left corner of the processor chassis slot.
1.Insert the processor into the slot on the system board.
When installing the processor into the chassis slot, be sure that the hole pattern on the chassis slot lines
up with the pins NOTE: on the
processor.
The processor should drop into the socket without any force.
2.Insert a small blade screw driver into the bottom slot opening on the processor and push toward the display to lock the processor.
Return