MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem user manual

Contents

Main User's Manual Page Section One - Introduction K56Plus (56Kbps) Section Two - Installation 2.1 Unpacking Your Modem 2.2 What You Need 2.3 Hardware Installation 2.4 Hardware Configuration (Plug and Play) Page 2.5 Software Installation and Configuration 2.6 Using the Fax, Voice, SVD, and Speakerphone Capabilities of the Modem 2.7 Testing Your Modem After Installation 2.8 Using Your Modem This software should be sufficient for all of your communication needs 2.9 Where To Go From Here Section Three - AT Command Set 3.1 Executing Commands 3.2 Command Structure 3.3 Basic AT Commands Page 3.4 Extended AT Commands 3.5 MNP/V.42/V.42bis Commands Page 3.6 Fax Class 1 Commands 3.7 Fax Class 2 Commands 3.8 SVD Commands Section Four - S Registers Table 4-1 S - Registers 15 Section Five - Result Codes 1. Make sure the communication software is configured Section Six - Troubleshooting Modem does not respond to commands. Modem does not dial. Section Seven - Support and Service Appendix A - Specifications Appendix B - Notices FCC Compliance FCC Class B Statement DOC Compliance Information