|
| DTR toggle |
| &D2 | Modem hangs up, returns to the |
|
| Command Mode after DTR toggle |
| &D3 | Resets modem after DTR toggle |
&F_ | &F | Recall factory default configuration |
&G_ | &G0 | Guard tone disabled |
| &G1 | 550 Hz guard tone |
| &G2 | 1800 Hz guard tone |
&K_ | &K0 | Disable flow control |
| &K3 | Enable RTS/CTS hardware flow |
|
| control |
| &K4 | Enable XON/XOFF software flow control |
&L_ | &L0 | Modem is set up for |
&M_ | &M0 | Asynchronous operation |
&S_ | &S0 | Force DSR Signal High (ON) |
| &S1 | DSR off in command mode, on in |
|
| mode |
&T_ | &T0 | Ends test in progress |
| &T1 | Perform Local Analog Loopback Test |
| &T3 | Perform Local Digital Loopback Test |
| &T6 | Perform a Remote Digital Loopback Test |
&V | &V0 | Displays Active Profile |
&W_ | &W0 | Stores the active profile as Profile 0 |
| &W1 | Stores the active profile as Profile 1 |
&Y_ | &Y0 | Configuration Profile 0 active upon |
|
| Power on or reset |
&Zn=x | Store phone number x into | |
|
| RAM |
%E_ | %E0 | Disable |
| %E1 | Enable |
%X_ | %X0 | Disable |
| %X1 | Enables |
#CID=n | n=0 | Disable Caller ID |
| n=1 | Enables Caller ID with formatting (date, |
|
| time, number, name) |
| n=2 | Enables Caller ID without formatting |
#CID? |
| Displays current Caller ID mode |
#CID=? |
| Returns Caller ID capabilities of modem. |
3.5 | MNP/V.42/V.42bis Commands |
%C_ | %C0 Disable MNP Class 5 and V.42bis data |
10
