MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem user manual Hardware Installation

(e.g., Windows 95),

or

B)A Plug and Play Revision 1.0a compliant PC.

Proceed to Section 2.3 now if you have every- thing required.

If you have neither 2A or 2B above, youneed to install Windows 95 to provide Plug and Play function- ality to your PC.

2.3 Hardware Installation

Installation of this modem requires opening and manipulating your PC. Exercise caution at all times when working with AC powered and static-sensitive equipment. Turn off and unplug your PC before instal- lation. Discharge any static electricity from your body by touching any bare metal surface of the PC system, such as its power supply cover.

1.Turn off and unplug your computer from the AC outlet.

2.Remove your computer's cover (refer to your computer's owner's manual).

3.Select any available half-card slot, and then re- move the slot cover (refer to Figure 2-1).

Figure 2-1 Expansion Slots

4.Carefully slide the internal modem into the slot you have chosen, applying even pressure until the modem is completely seated in the slot.

5.Fasten the retaining bracket with the screw from the slot cover. Make sure the modem is properly aligned. Store the slot cover for future use.

6.Replace the computer cover and plug in your computer.

2