Figure 3-3 PTZ Connection Port

Installation and Connections

c. For signal wires that are too long, 120Ω should be connected parallel between A, B lines on the far end to reduce reflection and guarantee signal quality.

d “485 A, B” of DVR cannot connect parallel with “485 port” of other device.

e. The voltage between of A,B lines of the decoder should be less than 5v.

2.Connect the other end of the cable to the proper pins in the connector on the camera.

3.Please follow the instructions to configure a camera to enable each PTZ device on the DVR.

Figure 3-3 PTZ Connection Port

HSVR-04

HSVR-16

RS-485 port

RS-485 port

USB

The USB port is for the USB storage device and USB mouse. For USB

Backup, please refer to Backup for detailed operation.

24

Page 32
Image 32
Honeywell HSVR-04, HSVR-16 user manual Installation and Connections, 3 PTZ Connection Port