Honeywell HSVR-16, HSVR-04 Honeywell, The NTP interface is shown in Figure, Parameter, Function

	Honeywell
Parameter	Function
NAS enable	Please select network storage protocol and then
	enable NAS function.
Server IP	Input remote storage server IP address.
Port	Input Remote storage server-port number.
User Name	Log in user account.
	The file length you upload to the FTP.
	When the setup is larger than the actual file length,
File length	the system will upload the whole file. When the
	setup is smaller than the actual file length, the
	system only uploads the set length and auto ignores
	the remaining section. When interval value is 0, the
	system uploads all corresponding files.
Password	The password you need to log in the server.
Remote Path	Remote storage file path.
	You can click Save after you complete setup for one
Save	channel, or you can complete the whole setup and
	then click the save button.
Refresh	Click this button to get device latest configuration
	information.

NTP

The NTP interface is shown in Figure 6-37.

Here you can realize network time synchronization. Please enable current function and then input server IP, port number, time zone and update interval.

121