interfaces shown in Figure 4-29,Figure 4-30and Figure

Honeywell

Preset, tour and pattern all need the value to be the control parameter. You can define it as you require.

 

You need to refer to your speed dome user’s manual for

Note

the auxiliary function definition. In some cases, it can be

used for special processes.

 

 

The following setups are usually performed in the

 

interfaces shown in Figure 4-29,Figure 4-30and Figure

 

4-31.

 

 

Preset Setup

In Figure 4-29, use eight direction arrows to adjust the camera to the proper position.

In Figure 4-30, click Preset and input the preset number. Clicking Set will save the preset.

Now you can add this preset to one tour.

Figure 4-32 Preset Setup

Activate Preset

In Figure 4-31, input the preset number in the “No.” field, and click Preset.

53

Page 61
Image 61
Honeywell HSVR-16, HSVR-04 Preset Setup, Activate Preset, Honeywell, interfaces shown in -29 , -30 and Figure, 4-31