Honeywell HSVR-16 Honeywell, Click copy interface, the interface is shown as in Figure, Parameter

Honeywell

Parameter	Function
Bit Rate Type	There are two options: VBR and CBR.
	Please note, you can set video quality in VBR mode only.
Quality	The value ranges from 1 to 6. Level 6 is the best video
	quality.
	In CBR mode, actual bit rate is limited by this value
Bit Rate	The value only affects average bit rate in VBR mode.
	Please refer to recommend bit rate for the detailed
	information.
Recommended	Recommended bit rate value according to the resolution
Bit Rate	and frame rate you have set.
	Here you can set video brightness, contrast, hue, saturation
Color Setting	and gain.
	The value ranges from 0 to 100. Default value is 50. See
	Figure 7-27.
Cover area	Here you can privacy mask the specified video in the
	monitor video.
(privacy mask)
	System max supports 4 privacy mask zones.
	You can enable this function so that the system overlays the
	time information in the video window.
Time Title	The OSD transparent value is not applicable in the current
	DVR version.
	You can use the mouse to drag the time tilte position.
	You can enable this function so that the system overlays
	channel information in the video window.
Channel Title	The OSD transparent value is not applicable in current DVR
	version.
	You can use the mouse to drag the channel title position.
	It is a shortcut menu button. You can copy current channel
Copy	setup to one or more channels. The interface is shown as:
	Figure 6-29.
	You can click the save button after you complete setup for
Save	one channel, or you can complete the whole setup and then
	click the save button.
Refresh	Click this button to get device latest configuration
	information.

Click copy interface, the interface is shown as in Figure 6-29.

If you have completed the setup for channel 1, you can click 3 to copy the current setup to channel 3. Or you can click 2, 3, and 4 to copy the current setup to channel 2, channel 3 and channel 4.

113