Motion Detection, Honeywell | Honeywell HSVR-16, HSVR-04 manual

Honeywell

Motion Detection

The detection menu is shown as below. See Figure 4-13.

∙Event type: From the drop-down list you can select the “Motion Detection” type.

∙Channel: Select the video channel for the motion detection setting.

∙Record Channel: Select the channel to activate the recording function once the alarm has sounded. Please make sure you have set the MD recording in the schedule interface (Main MenuSettingSchedule) and automatic recording in manual record interface (Main Menu- >Advanced->Manual Record)

∙Delay: When detected motion is completed, the system will continue alarm output and recording for a specified time respectively. The value ranges from 10-300(Unit: second).

∙Region: Click Select, the interface is shown as in Figure 4-14. Here you can set the motion detection zone. There are 396(PAL)/330(NTSC) small zones.

∙Sensitivity: The system supports 6 levels. The sixth level has the highest sensitivity. The fifth or lower levels are recommended to avoid setting a false alarm.

∙Show message: The system will send message to the local host screen to alarm you if you have enabled this function.

∙Send email: The system can send out an email to alert you when the alarm occurs.

∙PTZ activation: Here you can set PTZ movement (of any video channels) such as going to a preset when motion is detected in the current video channel. Click Select, and you can see an interface is shown as in Figure 4-15.

∙Period: Click Set to determine the period for the channel to be armed for motion detection. See the interface shown as in Figure 4-16. Here you can set for business days and non-business days. In Figure 4-16, click Set, and you will see an interface as shown in Figure 4-17. Here you can set your own business day and non-business day.

∙Alarm output: After the motion detection has occurred, the system enables the peripheral alarm devices.

∙Tour: Here you can enable the tour function when the alarm occurs. It is a one-window tour. Please go to Display on page 74 for tour interval setup.

37

Image 45

Honeywell HSVR-16, HSVR-04 user manual Motion Detection, Honeywell

Contents

HSVR-04 HSVR-16 Digital Video Recorder Rev. AHoneywell User ManualPage Honeywell Contents Honeywell 5 Understanding of Menu Operations and Controls Preset/Tour/Pattern/Scan Operations Honeywell Welcome Important Safeguards and Warnings ∙ Power cord ∙ SATA data cable and screws for HDD installation ∙ Software CD ∙ USB mouse ∙ Network cable ∙ 12VDC power adapter∙ User manual ∙ Remote controller ∙ 4 BNC connectors only in HSVR-04 package ∙ HDMI cable 1 Features and Specifications FeaturesOverview Features and Specifications Supports monitor touring modes alarm Specification Covers secret channel with blue screen though system is encoding Ordinary serial port for upgrade and maintenance and transparent 0－＋55 Authentication when shut down to make sure only authorized users Front Panel 2 Overview and ControlsFigure 2-1 The Front Panel of HSVR-04/HSVR-16 Name ENTER Overview and Controls Alarm Rear PanelFigure 2-2 The Rear Panel of HSVR-04 Figure 2-3 The Rear Panel of HSVR-16 10 Alarm input/alarm output/RS485 port 11 12VDC Power input port Connection Diagram12 Power button 2 Audio input 3 Video CVBS output 4 Audio output 5 Network port Figure 2-4 Device Connection Remote Controller Figure 2-5 Remote Controller The password input dialogue box will pop up if you have not logged in Mouse ControlLeft click mouse In real-time monitor mode, you can go to the main menu In English input mode stands for input a backspace icon and In real-time monitor mode, the shortcut menu will appear one HDD Installation 3 Installation and ConnectionsInstallation and Connections Check Unpacked DVR Please follow the instructions below to install the hard disk Connecting Video Input and Output Devices Connecting Power SupplyConnecting Video Input Guarantee the stability and reliability of the camera signal Connecting Video Output Connecting Audio Input & OutputAudio Input Audio Output Alarm Input and Output Details Alarm Input and Output Connection Figure 3-1 Alarm Input and Output of HSVR-04 Left and HSVR-16 Right Alarm Input Port Figure 3-2 Sample of Alarm Input Normal Close Type Alarm Output Port RS485 RS232 Figure 3-3 PTZ Connection Port Login, Logout & Main Menu Login4 Overview of Navigation and Controls Main Menu Overview of Navigation and ControlsFigure 4-1 Menu Login Figure 4-2 Main Menu Replace Button Battery Auto Resume after Power FailureLogout Figure 4-3 Logout Menu Live Viewing Manual RecordManual Record Manual Record Menu Enable/disable recording in all channels Enable/disable recording in specified channelsFigure 4-5 Recording Control Menu Figure 4-6 Different Status of Manual Record Stop all channel recording Figure 4-7 Automatic Recording in All ChannelsFigure 4-8 Start Manual Record in All Channels Search Menu Search & PlaybackFigure 4-9 Stop Recording in All Channels See Figure Please refer to the following chart for more information Figure 4-10 Record Search MenuSerial Number File backup Synchronized playback function when playbackBasic Operation Playback Backward playback and frame by frame playback Calendar Schedule Schedule MenuFigure 4-11 Sample of the Calendar Detect Quick SetupGo to Detect Menu Figure 4-12 Schedule Menu Motion Detection Figure 4-13 Motion Detection Menu Figure 4-15 PTZ Activation Setting Figure 4-14 Motion Detection Zone Setting Figure 4-16 Armed Period Setting Video LossFigure 4-17 Business Day and Non-Business Day Setting Tips Figure 4-18 Menu of Video Loss Camera Masking Go to alarm setup interface Alarm Setup and Alarm ActivationAlarm setup Figure 4-19 Menu of Camera Masking Honeywell Figure 4-21 The settings of PTZ Activation Figure 4-20 Menu of the Alarm Detect Device BackupFigure 4-22 Period Setup Figure 4-23 The Settings of Business Days and Non-Business Days Figure 4-24 Device Detection Menu of Backup Backup Figure 4-26 Backup in Progress Figure 4-25 Backup Menu with Search Results PTZ Control and Color Setup PTZ SetupCable Connection ∙ Protocol Select the corresponding PTZ protocol such as PELCOD Figure 4-29 PTZ Control Menu Figure 4-28 The Context Menu PTZ Trace Preset/Tour/Pattern/Scan Operations Figure 4-30 PTZ Setup Menu ∙ Preset ∙ Tour ∙ Pattern ∙ Auto scan ∙ Auto panFigure 4-31 Function Menu Activate Preset Preset SetupFigure 4-32 Preset Setup interfaces shown in Figure 4-29 , Figure 4-30 and Figure Pattern Setup Patrol setup Tour SetupActivate Patrol tour Figure 4-33 Tour Setup Activate Pattern Function Auto Scan SetupFigure 4-34 Pattern Setup Figure 4-35 Auto Scan Setup Click Page Switch again, and the system will go back to Figure Activate Auto Scan Menu Tree 5 Understanding of Menu Operations and Controls Search page Information HDD Info BPS Log Version Online Users Setting Understanding of Menu Operations and ControlsGeneral Encode Schedule RS232 Network Alarm Detect Pan/ Tilt/Zoom Display Default Backup page45 Advanced HDD Management Alarm Output Main Menu SettingGeneral Figure 5-1 The Main Menu - Setting ∙ Time format There are two types 24-hour mode or 12-hour mode Encode Figure 5-2 General Setup Menu Figure 5-3 DST Setup Menu WeelFigure 5-4 DST setup menu Date Note that some series do not support extra stream Schedule RS232Figure 5-5 Encode Menu Figure 5-6 Overlay Menu Figure 5-7 The RS232 Setup Menu Network Figure 5-8 Network Setup Menu Advanced Setup PPPoE IP FilterFigure 5-9 Advanced Settings Figure 5-10 IP Filter Menu Figure 5-11 The PPPoE Setup Menu NTP Setup Figure 5-12 The NTP Setup Menu DDNS Setup Figure 5-13 The DDNS Setup Menu Figure 5-15 The FTP Login Window Figure 5-14 The FTP Server Setup Menu Figure 5-16 The FTP Setup Menu Email Figure 5-17 The Email Setup Menu Detect AlarmPan/Tilt/Zoom Figure 5-18 The Command Window Figure 5-19 The PTZ Setup Menu Display Figure 5-20 The Display Setup Menu Figure 5-22 The Sample of Tour Mode Figure 5-21 The Channel Name Setup Menu Default Figure 5-23 The Default Setup Menu Advanced Figure 5-24 The Advanced Menu HDD Management Figure 5-25 The HDD Management Setup Menu Figure 5-26 The Abnormity Setup Menu Abnormity Figure 5-27 The Sample of No Disk Abnormity Alarm Output Figure 5-28 The Alarm Output Setup Menu Account Figure 5-29 The Account Management Menu Auto Maintain TV Adjust Figure 5-30 The Auto Maintain Setup MenuFigure 5-31 The TV Adjust Menu Information HDD InformationFigure 5-32 The Info Menu Figure 5-33The HDD Info Menu Figure 5-34 The BPS Display Menu Figure 5-35 The Log Search Menu Version Figure 5-36 The Version Menu Online Users Figure 5-37 The Online Users Menu Shutdown Figure 5-38 The Shutdown Menu Login 6 Web Client OperationNetwork Connection Figure 6-1 Sample of IE Login Web Client Operation Figure 6-2 The Internet Options Window For security reasons, please modify your password after you first loginFigure 6-3 The Settings for ActiveX Figure 6-5 The Window Switch Menu Figure 6-4 The Web Login Window Figure 6-6 The Preview Window Switch Menu Real-Time MonitorFigure 6-7 The Main Menu of Web Client Figure 6-8 Status Information Figure 6-10 Switch between the Main Stream and Extra Stream Figure 6-9 Control SetupOpen All Refresh Figure 6-11 Selection Menu of Local Play File Local Play Speed Direction key and 3D positioning keyZoom/Focus/Iris Figure 6-12 PTZ Control Menu Auto Scan PresetPattern Figure 6-13 The PTZ Setup Menu Auto tour ColorAssistant Figure 6-14 The Assistant Setup Menu Figure 6-15 The Color Setup Menu Picture Path and Record PathFigure 6-16 The More Setup Menu Figure 6-17 The Path Setup Menu for Picture System Information ConfigurationVersion Information Figure 6-18 The Path Setup Menu for Record Figure 6-20 Version Information Menu HDD information Figure 6-21 HDD Information Menu Figure 6-23 Log Backup Menu Click Backup, and the interface is shown in FigureFigure 6-22 Log Information Menu Please refer to the following sheet for log parameter information System Configuration General SetupFigure 6-24 General Setup Menu time. See Figure 6-25 and Figure Figure 6-25 DST Setup Menu Date Figure 6-26 DST Setup Menu Week Figure 6-27 The Encode Menu Encode Figure 6-28 The Color Setting Menu Click copy interface, the interface is shown as in Figure Schedule Figure 6-30 The Schedule Setup MenuFigure 6-29 The Copy To Menu in Figure Figure 6-31 The Date and Time Setup Menu RS232 Figure 6-32 The RS232 Setup MenuParameter Function System default setup NetworkFigure 6-33 The Network Setup Menu Figure 6-34 The Email Setup Menu Figure 6-35 The DDNS Setup Menu DDNS Figure 6-36 The NAS Setup Menu The NTP interface is shown in Figure Figure 6-37 The NTP Setup Menu Alarm Figure 6-38 The Alarm Setup Menu page 35 and Manual Record on page Detect Figure 6-40 The Detection Zone Setup Figure 6-39 The Detection Setup Menu Please refer to the following sheet for detailed information Figure 6-41 The PTZ Setup Menu Default & Backup Default setup is 8. Please set according to the speed dome dialDefault setup is 1. Please set according to the speed dome dial Advanced HDD ManagementFigure 6-42 The Default Setup Menu Figure 6-43 The HDD Management Menu Alarm I/O Figure 6-44 The Alarm I/O Config Menu Record Figure 6-45 The Record Control Menu Account Figure 6-46 The Account Management Menu Auto Maintenance Figure 6-47 The Auto Maintenance Menu Abnormity Figure 6-48 The Abnormity Setup Menu Figure 6-49 The Record Search Menu Search Figure 6-51 The Record Search Menu Saving Figure 6-50 The Record Save Menu Figure 6-52 The Message Box after Download Completed Download Type Alarm The IP address of playback device and channel numberFigure 6-53 The Playback Menu Figure 6-54 The Alarm Function Menu About Log outFigure 6-55 The Web Client Information Figure 6-56 The Logout Interface Un-install Web Control 7 FAQ There are the following possibilities Page Honeywell Page Honeywell Please visit our website for more information Slight difference may be found in user interface 8 Appendix HDD Capacity Calculationq i = d i ÷ 8 × 3600 ÷1024 Appendix Compatible USB Drive List TEL +86 21 35F Tower A, City Center, 100 Zun Yi Road, Shanghai 200051, ChinaFAX +86 Block 28, Section