∙Protocol: Select the corresponding PTZ protocol (such as PELCOD).

Honeywell

Boot up the DVR, and input the user name and password.

In the main menu, select SettingPan/Tilt/Zoom. The interface is shown as in Figure 4-27. Here you can set the following items:

Channel: Select the channel connected with the speed dome video port.

Protocol: Select the corresponding PTZ protocol (such as PELCOD).

Address: Identical to the device address set in the speed dome. Default address is 1.

Baud rate: Select corresponding baud rate. 2400 for Pelco-D protocol.

Data bits: Select corresponding data bits. Default value is 8.

Stop bits: Select corresponding stop bits. Default value is 1.

Parity: There are three options: Odd/Even/None. The default value is None.

Figure 4-27 PTZ Setup Menu

After completing all the settings click Save.

In the single window display (View 1) mode, right-click to open the interface shown in Figure 4-28(by clicking Fn in the front panel or in the remote controller will cause a menu to appear with only Pan/Tilt/Zoom and Color Setting options). .

49

Page 57
Image 57
Honeywell HSVR-16, HSVR-04 user manual Honeywell, ∙ Protocol Select the corresponding PTZ protocol such as PELCOD