Honeywell HSVR-04, HSVR-16 user manual Default & Backup, Web Client Operation, Parameter, Function

Web Client Operation

Please refer to the following sheet for detailed information.

Parameter	Function
Channel	You can select monitor channel from the dropdown list. .
Protocol	Select the corresponding dome protocol (such as PELCOD),
	Set corresponding dome address. Default value is 1. Please
Address	note your setup here shall comply with your dome address;
	otherwise you can not control the speed dome.
Baud Rate	Select the dome baud rate. Default setup is 9600.
Data Bit	Default setup is 8. Please set according to the speed dome dial
	switch setup.
Stop bit	Default setup is 1. Please set according to the speed dome dial
	switch setup.
Parity	Default setup is none. Please set according to the speed dome
	dial switch setup.
	You can click the save button after you complete setup for one
Save	channel, or you can complete the whole setup and then click
	the save button.
Refresh	Click this button to get the device’s latest configuration
	information.

Default & Backup

Default: Restore the factory default settings. You can select corresponding items.

Backup: Export current configuration to local PC or import configuration from current PC.

Please refer to Figure 6-42.

Please note that the system cannot restore some information such as the network IP address.

128