Honeywell HSVR-16, HSVR-04 user manual Web Client Operation, Network Connection, Login, Honeywell

Honeywell

6Web Client Operation

∙All the operations here are based on HSVR-16.

Note	∙ There might be slight differences in the interface due
	to the updated series.

Network Connection

Before the web client operation, please check the following items:

∙Network connection is right

∙DVR and PC network setup is right. Please refer to network setup (main menusettingnetwork)

∙Use order ping ***.***.***.***(* DVR IP address) to verify that there is a good connection. Usually, the return TTL value should be less than 255.

∙Open the IE and then input DVR IP address.

∙System can automatically download latest web controls and the new version can overwrite the previous one.

∙If you want to un-install the web control, please run uninstall webrec2.0.bat. Or you can go to C:\Program Files\webrec to remove single folder. Please note, before you un-install, please close all web pages, otherwise the un-installation might result in error.

Login

Open IE and input DVR address in the address column. For example, if your DVR IP is 10.10.3.16, then please input http:// 10.10.3.16 in IE address column. See Figure 6-1

93