Honeywell HSVR-04, HSVR-16 user manual Detect, Web Client Operation, Parameter, Function

Web Client Operation

Parameter	Function
Anti-dither	Not effective in current DVR version.
	Enable alarm activation function. You need to select alarm
Alarm Out	output port so that the system can activate corresponding alarm
	device when alarm occurs.
Alarm	System can delay the alarm output for specified time after alarm
Latch	ended. The value ranges from 10 seconds to 300 seconds.
Record	System auto activates current channel to record once alarm
	occurs (working with alarm activation function). Please note
Channel	current device shall be in auto record mode (see Schedule on
	page 35 and Manual Record on page 28).
Record	System can delay the record for specified time after alarm
Latch	ended. The value ranges from 10s to 300s.
Send Email	Enable email function. System can send out email to alert you
	when alarm occurs and ends.
	Display video in local monitor window by tour. If there are
Tour	record channels selected, only the record channels will be
	displayed in the tour.
	Here you can set PTZ movement when alarm occurs. Such as
PTZ	go to preset x when there is an alarm.
activation	The PTZ configuration events include preset, auto-tour, and
	pattern.
Copy	It is a menu shortcut button. You can copy the current channel
	setup to one or more (all) channels.
	You can click the save button after you complete setup for one
Save	channel, or you can complete the whole setup and then click
	the save button.
Refresh	Click this button to get the device’s latest configuration
	information.

Detect

Analyzes the video. The system enables the motion detection alarm when it detects the motion reaches the specified sensitivity.

The detection interface is shown as in Figure 6-39.

124