PTZ Control and Color Setup

Overview of Navigation and Controls

extension name is “.dav”. You can visit our website to view listed CD-ROM brands.

Tips:

During the backup process, you can click ESC to exit the current interface for other operations. The system will not terminate the backup process.

When you click Stop during the burning process, backup

Note will be stopped immediately, and some selected files may not be saved correctly in the device.

PTZ Control and Color Setup

The operations described here are mainly based on

Note PELCO-D protocol for Honeywell HSPT-120 speed dome. For other protocols, there might be a little difference.

Cable Connection

Please follow the procedures below to go on cable connection

Connect the dome RS485 port to DVR 485 port.

Connect the dome video output cable to DVR video input port.

Connect the power adapter to the dome.

PTZ Setup

The camera video should be in the current screen. Before setup, check whether the following connections are right:

Note

PTZ and decoder connection

 

Decoder address setup

Decoder A (RS485 +) / B (RS485 -) line connects with DVR A/B line

48

Page 56
Image 56
Honeywell HSVR-04, HSVR-16 PTZ Control and Color Setup, Cable Connection, PTZ Setup, Overview of Navigation and Controls