MORE INFORMATION ABOUT YOUR VCR
VCR RESET
1. Press the STOP | STOP | button on the front of the VCR. |
|
2.Press and hold MENU 
and CHANNEL UP CHANNEL K buttons together on the front of the VCR for 10 seconds.
✔VCR RESET IS NOW COMPLETE
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel this can be set manually between channels 21 and 69 by following the procedure below.
1. Press the STANDBY | button. |
2.Press and hold the MENU 
button for 3 seconds.
3.Wait for a flashing channel number to appear on the VCR display.
4.The channel number can now be changed by using the MENU SELECT 
/
buttons.
5.Your TV will now require tuning to the new channel. (The screen opposite should be displayed on the TV)
SET
V CR R F
6.Press the SET 
button to store.
(Whitetext | S E T : E N T E R ME NU : E X I T |
blue background) |
|
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON. To do this press the CLEAR 
then SET SET buttons on the remote control at point 3 from RF CHANNEL TUNING above. or at point 4 of AUTO TUNING on page 5. This will help minimise interference.
www.sharp.co.uk/support
37
