BASIC OPERATION
IMMEDIATE RECORDING CONTINUED
TAPE SPEED SELECTION
Your VCR has three tape speeds: SP (Standard Play) , LP (Long Play) and EP (Extended Play).
Press the TAPE SPEED button on the remote control to select the desired setting.
It is recommended that EP recordings are only played back on the VCR on which originally recorded.
You can record the channel you are watching or a different channel.
1. | Insert a video tape into your VCR. |
|
|
|
| |
2. | Select the channel you wish to record on the VCR as |
|
| |||
| above. |
|
|
|
|
|
3. | To start recording, press REC | . |
|
|
|
|
4. | To pause during recording, press PAUSE/STILL |
|
| . | ||
|
| |||||
|
| |||||
5. | To continue recording, press REC | . |
|
|
| |
6. | To stop recording, press STOP |
| once. |
|
| |
|
|
|
SIMPLE TIMED RECORDING:
1.Press REC .
2.To specify a stop time, each additional press of
REC will delay the stop time by 10 minutes.
3.To stop recording at any time, press
STOP once.
0
REW
| PLAY / X2 |
REC | PAUSE/STILL |
| STOP |
TAPE | DPSS |
SPEED | SLOW |
REMOTE CONTROL
STOP 15:30
NOTES:
•If the tape ends before the recording is complete the VCR will stop recording, rewind, eject the tape and place the VCR into STANDBY mode, or just eject the tape and place the VCR in STANDBY timer mode if the VCR is in timer record mode.
•If the VCR ejects the video tape when you press REC the tape is record protected. i.e. record protection tab has been removed.
www.sharp.co.uk/support
12