INSTALLING YOUR VCR
The clock setting screen will now appear. To set the time and date follow the steps below:
1.Press the [ / ] menu select buttons to select either 12 or 24 hour clock operation.
2.Press [ / ] to select TIME. Enter the time using the NUMBER BUTTONS or the [ / ] buttons. If the minutes or hours are
less than 10, enter the leading 0. If using the 12 hour clock enter AM or
PM by pressing the AM/PM button on the remote control.
3.Press [ / ] to select DATE. Enter the date using the NUMBER BUTTONS or the [ / ] buttons. For example, for 1st April
enter 01 04.
4.Press [ / ] to select YEAR. Enter the last two digits of the year using
the NUMBER BUTTONS or the [ / ] buttons. For example, for 2002 enter 02. For the year 2003 enter 03.
24 hour example:
| C L OCK |
| |
MOD E | T I ME | DA T E | Y E AR |
2 4 H | 1 5 : 0 5 | 0 1 / 0 4 | 0 2 |
MOD E : 2 4 H / 1 2 H |
|
| |
| : S E L E C T | : CHANGE | |
S E T : E N T E R | ME NU : E X I T |
12 hour example:
| C L OCK |
| |
MOD E | T I ME | DA T E | Y E AR |
1 2 H | 0 3 : 0 5 PM 0 1 / 0 4 | 0 2 | |
MOD E : 2 4 H / 1 2 H |
|
| |
| : S E L E C T | : CHANGE | |
S E T : E N T E R | ME NU : E X I T |
5.Press the SET button to store the time and date.
NOTE:
•You will need to update the clock for Winter/Summer daylight saving.
✔All the programmes should now be correctly tuned in and the clock set.
www.sharp.co.uk/support
8