BASIC OPERATION
HOW TO SET A DELAYED RECORDING
7.Enter the start time using the[
/
] or NUMBER BUTTONS, hours first then
minutes (when entering less than 10 hours or minutes add a '0' before the number), for
example for 21:05 start, press 2 1 0 5.
Then press 
to move to the next setting.
8.Enter the stop time, for example for 22:30 stop, press 2 2 3 0.
9.If you wish to change the RECORDING
SPEED, use the [
/
]to highlight SP. Press[
/
]to select either standard play
(SP), long play (LP) or extended play (EP) as required.
10.Press the SET SET button to confirm.
•The MENU now shows all the timer settings you have entered. If you wish to make additional timer recordings, repeat this procedure.
11.When you have completed entering timer
settings, press the MENU 
button to remove the menu from the TV screen.
7.
DA T E P R S T AR T S T OP | 1 / 2 | |||
| ||||
2 1 / 0 6 0 2 | 1 2 : 0 0 | 1 3 : 0 0 S P | ||
9 / 0 7 D 0 3 | 2 1 : 0 5 | |||
- | - - | - - | ||
- | - - | - - | ||
9.
DA T E P R S T AR T S T OP | 1 / 2 | |||
| ||||
2 1 / 0 6 0 2 | 1 2 : 0 0 | 1 3 : 0 0 S P | ||
9 / 0 7 D 0 3 | 2 1 : 0 5 | 2 2 : 3 0 L P | ||
- | - - | - - | ||
- | - - | - - | ||
12.Ensure that the tape on which you wish to record is inserted into the VCR, then press the
TIMER ON/OFF 
button once to place
the VCR in TIMER STANDBY mode. 
will be shown on the display.
NOTES:
•If the 
symbol flashes a video tape has not been inserted into the VCR.
•If the video tape is ejected when the VCR tries to record the record protection tab has been removed.
•During recording, press STOP 
to cancel the recording. If there are further recordings to be made, the VCR will return to Timer Standby.
www.sharp.co.uk/support
16
