BASIC OPERATION
HOW TO CHECK, CHANGE AND CANCEL A DELAYED RECORDING
Before you start!
• If the Timer Standby symbol 
appears on the VCR display,
press the TIMER ON/OFF 
button to remove the 
symbol.
CHECKING A RECORDING
1.Press STOP 
to switch on the VCR.
2.Press the MENU 
button.
3.Press[
/
]to select TIMER. Press the SET SET button to confirm.
•All the delayed recordings in the VCR’s memory will be shown.
4.If the settings are correct press the MENU button to exit.
•If you wish to change or cancel any settings, follow the procedures below.
CHANGING A RECORDING
1.Follow steps 1 to 3 of CHECKING A RECORDING above.
2.To change a delayed recording, press
[ 
/ 
] to highlight the recording, then press
SET
the SET 
button to select.
3.Press[
/
]to highlight the setting to be changed and correct it by using the[
/
] or the NUMBER BUTTONS.
4.When all corrections are complete press the
SET
SET 
button to confirm, then press the
MENU 
button to exit.
CANCELLING A RECORDING
1.Follow steps 1 to 3 of CHECKING A RECORDING above.
2.To cancel a delayed recording, press
[
/
]to highlight the recording to be cancelled, then press CLEAR.
3.Press the MENU 
button to exit.
NOTE:
MENU SCREEN
TI ME R MOD E
S E T U P
: S E L E C T |
|
S E T : E N T E R | ME NU : E X I T |
1 / 2
DA T E P R S T AR T | S T OP |
2 1 / 0 6 0 2 1 2 : 0 0 | 1 3 : 0 0 S P |
- | - - | - - | ||||||||
- | - | / - - | - | - | - | : - - | - | : - - | - | - |
- | - | / - - | - | - | - | : - - | - | : - - | - | - |
1 / 2
DA T E P R S T AR T | S T OP |
2 1 / 0 6 0 2 1 2 : 0 0 | 1 3 : 0 0 S P |
- | - - | - - | ||||||||
- | - | / - - | - | - | - | : - - | - | : - - | - | - |
- | - | / - - | - | - | - | : - - | - | : - - | - | - |
•If there are some programmes to be recorded, do not forget to press TIMER ON/OFF
button to return the VCR to Timer Standby mode.
www.sharp.co.uk/support
17
