2Wire AVX-7300 Switching the Video Select Setting, Setting the Automatic Open Mode

Switching the Video Select Setting

You can change the video select setting.

1 Press the WIDE button and select the video select mode (VSEL SET) in the Display Setting Menu.

2 Switch to the desired video select setting in the following order:

AUTO = MANUAL = AVM

7AUTO

When the Head Unit source is switched to a component (e.g. SDV-P7) connected to the AV-BUS, output automatically switches to video from that component.

Note:

•If an SDV-P7 is connected, you can use this function when using the SDV-P7 with the IP- BUS mode.

7MANUAL

You can switch between VTR and AV with the V.SOURCE button. (Refer to page 12.)

7AVM

This prevents switching from video from a component connected to the RGB input.

Setting the Automatic Open Mode

To prevent the display from hitting the shift lever of an automatic vehicle when it is in the

“P” (park) position, or when you do not wish opening/closing of the display to be carried out automatically, you can switch this function ON/OFF.

1	Press the WIDE button and select the automatic open mode (AUTO
	OPEN) in the Display Setting Menu.
	Switch the automatic open ON/OFF.
2

Setting the Display

14