2Wire g700, s8300 manual Introduction, Avaya S8300/G700 and Siemens Hicom

1. Introduction:

The configuration shown in figure 1 illustrates a PRI Trunk Connection between an Avaya S8300 Media Server and an Avaya G700 Media Gateway (S8300/G700) running Avaya MultiVantage Software placed as an adjunct to a Siemens Hicom 300.

The main Central Office connection for the solution is made through the Siemens Hicom 300. Additional Central Office lines can be connected to the S8300/G700 in order to facilitate the use of Avaya™ Extension to Cellular (EC500) and other Avaya MultiVantage Software features.

This document assumes the reader has a basic knowledge of programming Multivantage and Hicom platforms. Basic interoperability between S8300/G700 and Hicom 300 and how it was accomplished is described within these application notes. It should be noted that the interoperability of the S8300/G700 and Hicom 300 is established on basic network fundamentals, and more advanced areas of networking and call routing such as QSIG, AAR and ARS, while functional in this configuration, are not within the scope of this document. E-1 connectivity is possible but requires additional hardware and software upgrades. The Siemens Hipath series is not covered in this document. The Hipath has very different user interfaces and hardware architecture.

	EC500
WAN/LAN	PSTN

CAJUN ® P330

4612 IP 4624 IP

S8300/G700

ISDN PRI

Optiset E

SIEMENS

HICOM 300

6416D+ 8405 Optiset E

Figure 1. Avaya S8300/G700 and Siemens Hicom 300

Jsl	© 2002 Avaya Inc All Rights Reserved	IP Enabling Siemens
		Hicom with Avaya
		MultiVantage Solutions
LPH 11-27-02		2