32 CHAPTER 3: HARDWARE DESCRIPTION AND INSTALLATION
Installing Analog
Equipment You can connect an analog touch-tone telephone, answering machine, fax
machine, or external analog modem to the 56K LAN Modem’s pass-through
Phone port.
You will need an RJ-11 to RJ-11 cable that came with the analog device for your
analog phone port connection.
To install an analog device:
1Insert one end of an RJ-11 cable into the port labeled Phone on the back of the
56K LAN Modem, as shown in Figure 14.
Figure 14 Analog Equipment Connection
2Insert the other end of the RJ-11 cable into the appropriate RJ-11 port on the
analog device.
Installing the Power Cable To install the power cable:
1Connect the 56K LAN Modem power module cable to the 10-18 VDC power
connector on the back panel of the 56K LAN Modem, as shown in Figure 15.
Figure 15 Power Cable Connection
RESET
10-18 VDC
0.8 A MAX LINE PHONE
RESET
10-18 VDC
0.8 A MAX TELCO PHONE