Using a Connection Script 81
Accessing the Script
Configuration Page You can associate a unique connection script for each of your four service provider
profiles. You enter the script via the LAN Modem’s Script Configuration page.
To access the Script Configuration page, do the following.
1From the LAN Modem main page, click the Service Providers icon.
The Service Provider Selection page opens.
2Choose the service provider for which you want to create or edit an existing
connection script and click Select. If you are creating a new service provider,
choose New (Internet Service Provider) or New (Private Network) and click Select.
For instructions on creating or editing service provider profiles, refer to Chapter 6,
“Setting Up Additional Service Providers.”
The Service Provider Parameters page opens. Review your parameters and make
changes if desired.
3Click the Script button located at the bottom of the Service Provider Parameters
page to access the Script Configuration page.
A dialog box opens.
4Click OK to enter the Script Configuration page.
The Script Configuration page opens, as shown in Figure 43.
.
Figure 43 Script Configuration Page