TCP/IP Setup Using Windows 3.11 43
Figure 29 Network Group Box
4From the Network Setup dialog box, click the Drivers button.
Figure 30 Network Setup Dialog Box
5From the Network Drivers dialog box, click Add Protocol.
6Select Unlisted or Update Protocol and then click OK.
7From the Install Driver dialog box, enter the path to the MS _TCP directory.
For example, if you installed MS_TCP on your C: drive in a directory called
MS_TCP, you would enter C:\MS_TCP.
8Select MS TCP/IP-32.X and then click OK to install.
9After the installation is complete, click Close.
10 Click OK.
11 From the MS TCP/IP Configuration dialog box, check the Auto Configuration
check box and then click OK.
12 Restart your PC to allow the changes to take effect.