62 CHAPTER 6: ADVANCED CONFIGURATION
Setting Up a Connection
to a Private Network This section describes your 56K LAN Modem setup procedures for accessing a
private network, such as a remote office or corporate LAN.
Before You Begin
Before you begin, you will need the following information from your Network
Administrator:
■Telephone number(s) you must dial to access this private network
■User ID and password
■WAN link IP address (if the private network to which you are connecting
requires a static IP address and subnet mask).
In addition, you may need the following information, depending on your
particular network setup. Check with your Network Administrator.
■IP address/subnet mask of the remote LAN you wish to access
■Domain name of the remote LAN
■DNS IP address(es)
Setting Up a Connection to a Remote LAN
The following steps allow you to set up a connection to a remote LAN.
1From the 56K LAN Modem main page, click the Service Providers image.
The Service Provider Selection window appears.
Figure 38 Private Network Service Provider Selection Window
2Select New Private Network from the drop-down list box and click Select.
The Private Network Parameters window appears.