Installing the 3Com NIC Diagnostics Program

29
7Do one of the following:
■If the Windows 95 files were not copied to your hard drive, remove the EtherCD
from the CD-ROM drive, insert the Windows 95 CD, enter the path to the CD-ROM
drive, and then click OK.
■If the Windows 95 files were copied to your hard drive, enter the path to the
directory containing these files, and then click OK.
Files are copied. The Systems Settings Change screen appears, prompting you to
restart your computer.
8Click Yes.
The software installation is complete. Next, verify the driver installation to confirm that the
NIC is properly installed.
Verifying the Driver Installation
1Right-click the My Computer icon, and then click Properties.
2Select the Device Manager tab.
3Double-click Network adapters and make sure that the name of the 3Com 10/100 PCI
NIC appears.
If a red X or a yellow exclamation point (!) appears by the name of the NIC, the
installation was not successful. See “Troubleshooting the NIC Installation” on page 83
for troubleshooting help.
After you have verified that the driver has been installed properly, the next step is to install
the 3Com NIC Diagnostics program for Windows operating systems (see the next section,
“Installing the 3Com NIC Diagnostics Program”).
Installing the 3Com NIC Diagnostics Program
This section describes how to install the 3Com NIC Diagnostics program after you have
already installed the network driver. This program is for PCs running Windows 2000,
Windows NT 4.0, and Windows 98, 95, or Me.
The 3Com NIC Diagnostics program allows you to run tests that determine the status of
your network and the NIC. It also allows you to configure the NIC, view network statistics
and LEDs, and access support databases.
NOTE: After Windows restarts, double-click the Network icon in the Control Panel
and make sure that the configuration settings are properly set for your network
environment. Contact your system manager for assistance.
NOTE: If you manually install the network driver by selecting options on the
EtherCD Welcome Screen, you have the option of installing the network driver
with or without the 3Com NIC Diagnostics program. If you have already installed
the network driver together with the 3Com NIC Diagnostics program for
Windows, you can ignore this section. You are ready to configure the NIC as
described in Chapter 7, “Configuring the NIC.”
NOTE: When you install the 3Com NIC Diagnostics program, the network driver is
automatically updated to the latest version on the EtherCD.