4 Installing and Configuring Data Encryption Offloads
40
2Enter a name for the filter, and then click Add.
The IP Filter Wizard starts.
3Click Next.
The IP Traffic Source screen appears.
4Click Next.
The IP Traffic Destination screen appears.
5Select A Specific IP Address in the pull-down list.
The IP Address entry box appears on the IP Traffic Destination screen.
6Enter destination IP address, and then click Next.
The IP Protocol Type screen appears.
7Accept the default, and then click Next.
8Click Finish to close the IP Filter Wizard.
9Click Close to close the IP Filter List screen.
Binding the Filter
This sequence attaches the new filter to the policy.
The IP Filter List screen appears.
1Enable the option for the new filter name and make sure that the new filter name
is selected.
2Click Next.
Creating the Filter Action
This sequence defines how the filter acts on the policy.
The Filter Action screen appears.
1Click Add.
The Filter Action Wizard starts.
2Click Next.
The Filter Action Name screen appears.
3Enter a name (for example: 3DES to the Server), and then click Next.
The Filter Action General Options screen appears.
4Accept the default, and then click Next.
The screen, Communicating with computers that do not support IPsec, appears.
5Accept the default value, and then click Next.
The IP Traffic Security screen appears.
6Select Custom, and then click Settings.
The Custom Security Method Settings screen appears.
7Enable the Data integrity and encryption (ESP): check box, and then make the
appropriate selections in the Integrity and algorithms list boxes.
8Click OK, Next, and then Finish.