Appendix G: Troubleshooting the NJ95
Appendix G: Troubleshooting the NJ95
If you encounter problems with the NJ95:
■Verify the NJ95 is receiving power by viewing the Power LED (it should be lit). If the Power LED is not lit, make sure:
■The other end of the network cable is plugged into a system that provides Power over Ethernet according to IEEE 802.3af, if using Power over Ethernet.
■The Local Power Supply is plugged into the NJ95 and into a working electrical outlet, if using Local power supply.
■Verify the NJ95 is connected to the network properly by viewing the Link LED (it should be lit). If the Link LED is not lit, make sure the network cable:
■Is terminated properly. Refer to the connector manufacturer’s instructions for terminating the cable. Be sure to test the connector and verify it is working.
■Has a valid connection to the network.
■Adheres to proper length and cabling specifications for your network.
■Make sure the port on the switch to which the NJ95 is connected is configured as a standard
39
