Installing NetworkDrivers 9
The Insert Disk screen appears, requesting that you insert
the Windows 98 disk.
7Remove
EtherDisk 1, insert the Windows 98
installation diskette in drive A, and click OK.
Alternatively, if the Windows98 ins tallation files reside on
your hard drive, click OK, enter the path to the directory
containing these files in the Copy files from entry box, and
then click OK.
Files are copied. The installation is complete when th e Add
New Hardware wizard prompts you to click Finish.
8Click
Finish.
The System Settings Change screen appears, prompting
you to restart the computer.
9 Remove any remaining diskette from drive A, and
then click Yes to restart the computer.
You must restart your computer to complete the
installation.
The installation is comple te. Go to “Verifying Successful
Installation” on page 13 to confirm that the NIC is properly
installed.
After Windows restarts, double-click the Network icon in
the Windows Control Panel and make sure that the
configuration settings are properly set for your network
environment. Contact your system administrator for
assistance.
Windows 95
To install the NIC driver and software under Windows95,
you need the Windows 95 installation files. These files may
be on a CD or diskettes, or they may have been copied to
your hard drive when Windows 95 was installed on
your system.
If you encounter problems during the installation, see the
W95NDIS.TXT file located in the Help directory on
EtherDisk2 for troubleshooting tips.