5ETHERNET CONFIGURATION
COMMANDS
interface ethernet The interface ethernet Global Configuration mode command enters
the interface configuration mode to configure an Ethernet type interface.
Syntax
interface ethernet interface
Parameters
■interface — Valid Ethernet port. Elana
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables configuring Ethernet port g18.
interface range
ethernet
The interface range ethernet Global Configuration mode command
configures multiple Ethernet type interfaces at the same time.
Syntax
interface range ethernet {port-list | all}
Console(config)#
interface ethernet
g18