366 CHAPTER 24: WIRELESS AP GENERAL COMMANDS
Example
The following example displays information on an AP radio interface.
show wlan aps counters
The show wlan aps counters Privileged EXEC mode command displays
information on the AP traffic.
Syntax
show wlan aps counters [radio a | g] [ap name]
Parameters
■radio a | b — Specified Radio type. If unspecified shows the total
traffic on the AP.
■ap name — Specified AP name. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
Console # show wlan ap AP1 interface ethernet
VLANs Allowed: 2, 3
Native VLAN: 2
Tunnel source: Enabled
Tunnel priority: 20
Ethernet MAC address: 00-9E-92-8C-73-FC