6Installing a Splitter and Micro-filter
2.INSTALLING A SPLITTER AND MICRO-FILTER
A splitter and micro-filter allow you to use your Router and telephone at the same time. The splitter connects to the ADSL wall connection, and then pro- vides two connectors:
•An RJ11 connector which connects to the Router with the RJ11 cable
•A telephone jack connector which can be connected to your telephone
There must also be a micro-filter between the splitter and the telephone. The micro-filter ensures that DSL data signal does not interfere with the telephone voice signal. A micro-filter must be installed inline with each telephone to prevent signal interference. Splitters are now available with built in microfil- ters, which simplifies the setup as shown in the diagram below. Splitters and micro-filters can be obtained from your ISP or a computer store.
| Combind Splitter |
Wall | and Micro-filter |
| | | | |
socket | | | | | |
| | | | |
| | | | |
| | | | | |
| | | | | |
| | | | | |
OfficeConnect | ® | ADSL Wireless |
108 Mbps 11g Firewall Router |
Phone
| For Telephone Extensions |
| Wall | Micro-filter |
| | |
| socket | | |
| | | |
| | | |
| | | |
Phone