2-11
To do… Use the command… Remarks
Create a RADIUS scheme and
enter its view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Set the IP address and port
number of the primary RADIUS
authentication/authorization
server
primary authentication
ip-address [ port-number ]
Required
By default, the IP address and
UDP port number of the
primary server are 0.0.0.0 and
1812 respectively for a newly
created RADIUS scheme.
Set the IP address and port
number of the secondary
RADIUS
authentication/authorization
server
secondary authentication
ip-address [ port-number ]
Optional
By default, the IP address and
UDP port number of the
secondary server are 0.0.0.0
and 1812 respectively for a
newly created RADIUS
scheme.
z The authentication response sent from the RADIUS server to the RADIUS client carries
authorization information. Therefore, you need not (and cannot) specify a separate RADIUS
authorization server.
z In an actual network environment, you can specify one server as both the primary and secondary
authentication/authorization servers, as well as specifying two RADIUS servers as the primary and
secondary authentication/authorization servers respectively.
z The IP address and port number of the primary authentication server used by the default RADIUS
scheme "system" are 127.0.0.1 and 1645.
Configuring RADIUS Accounting Servers
Follow these steps to configure RADIUS accounting servers:
To do… Use the command… Remarks
Enter system view system-view —
Create a RADIUS
scheme and enter its
view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme named
"system" has already been created in
the system.
Set the IP address and
port number of the
primary RADIUS
accounting server
primary accounting
ip-address [ port-number ]
Required
By default, the IP address and UDP port
number of the primary accounting server
are 0.0.0.0 and 1813 for a newly created
RADIUS scheme.