1-18
Configuring the enhanced cluster features Complete the following tasks to configure the enhanced cluster feature:
Task Remarks
Configuring cluster topology management
function Required
Configuring cluster device blacklist Required
1) Configuration prerequisites
Before configuring the cluster topology management function, make sure that:
z The basic cluster configuration is completed.
z Devices in the cluster work normally.
2) Configuration procedure
Follow these steps to configure cluster topology management function on a management device:
To do… Use the command… Remarks
Enter system view system-view —
Enter cluster view cluster —
Check the current topology and
save it as the standard
topology.
topology accept { all [ save-to local-flash ] |
mac-address mac-address | member-id
member-id | administrator } Required
Save the standard topology to
the Flash memory of the
administrative device
topology save-to local-flash Required
Restore the standard topology
from the Flash memory of the
administrative device
topology restore-from local-flash Optional
Display the detailed information
about a single device display ntdp single-device mac-address
mac-address
Display the topology of the
current cluster
display cluster current-topology
[ mac-address mac-address1
[ to-mac-address mac-address2 ] |
member-id member-id1 [ to-member-id
member-id2 ] ]
Display the information about
the base topology of the cluster
display cluster base-topology
[ mac-address mac-address | member
member-id ]
Display the information about
all the devices in the base
cluster topology display cluster base-members
Optional
These
commands can
be executed in
any view.