
1-4
z A newly specified IP address overwrites the previous one if there is any.
z The IP address of a VLAN interface must not be on the same network segment as that of a
loopback interface on a device.
Configuring Static Domain Name Resolution
Follow these steps to configure static domain name resolution:
To do… Use the command… Remarks
Enter system view system-view —
Configure a mapping between
a host name and an IP address ip host hostname ip-address
Required
No IP address is assigned to a
host name by default.
z The IP address you assign to a host name last time will overwrite the previous one if there is any.
z You may create up to 50 static mappings between domain names and IP addresses.
To do… Use the command… Remarks
Display static DNS database display ip host
Display information about a
specified or all Layer 3 interfaces
display ip interface [ interface-type
interface-number ]
Display brief configuration
information about a specified or all
Layer 3 interfaces
display ip interface brief
[ interface-type [ interface-number ] ]
Available in any
view
IP Address Configuration Example
Network requirement
Assign IP address 129.2.2.1 with mask 255.255.255.0 to VLAN-interface 1 of the switch.