9ADMINISTERING APPLETALK
ROUTING
This chapter describes how to set up your LANplex system to use the
AppleTalk protocol to route packets. For more information on how
AppleTalk routing works, see Part II of this Guide.
You can display and/or configure the following:
■AppleTalk interfaces
■Routes
■AARP cache
■Zones
■AppleTalk Forwarding
■Checksum generation/verification
■AppleTalk statistics
Each Ethernet/FDDI Switching Module (EFSM) operates as a separate
AppleTalk router. This means that each module has its own interfaces,
routing table, and statistics. AppleTalk routing does not operate on the
Ethernet Switching Module (ESM) or the Token Ring Switching Module
(TRSM).