8ADMINISTERING IPX ROUTING
This chapter describes how to set up your LANplex system to use the
Internet Packet Exchange (IPX) protocol to route packets. For more
information about how IPX works, see Part II of this Guide.
You can display and/or configure the following:
■IPX interfaces
■Routes
■Servers
■IPX forwarding
■Routing Information Protocol (RIP)
■Enhanced RIP mode
■Service Advertising Protocol (SAP)
■IPX statistics
Each Ethernet/FDDI Switching Module (EFSM) operates as a separate IPX
router. This means that each module has its own interfaces, routing table,
and statistics. IPX routing does not operate on the Ethernet Switching
Module (ESM) or the Token Ring Switching Module (TRSM).