Copying Software to a Hard Disk 2-3
6Use the supplied script to decompress and restore the split file
(lp6000R00, lp6000R01, and lp6000R02).
# ./restore_lpxR
See the README1 file for size and checksum information.
Copying to DOS The LANplex software for a DOS-based hard disk is distributed on two
floppy diskettes. Diskette #1 contains the LANplex software. Diskette #2
contains the SNMP MIBs.
The SNMP MIBs, on diskette #3, are provided so that you can compile on 3rd
party applications.
To copy software to a DOS hard disk, follow the instructions below:
If the directory “lp6000R” does not exist on your computer, create the
directory before proceeding.
1Insert diskette #1 into a disk drive (these instructions assume drive B:).
2Copy the system software file to the directory of your computer using the
following commands:
cd lp6000R
copy b:lp6000R.exe
The file lp6000R.exe is a self-extracting archive. It decompresses and creates
the loadable lanplex file.
3Decompress the file using the following command:
lp6000R
This creates a file called lp6000R, which you can then load into flash
memory.