10LANPLEX® 6000 EXTENDED SWITCHING SOFTWARE
3At the command line in the Setup dialog box, enter a:setup and click OK.
A Welcome screen appears. You are prompted to continue or to cancel the installation. To continue, click Next. To cancel the installation and exit the Setup program, click Cancel.
You will be guided through the rest of the installation procedure by the Install Shield Wizard.
This procedure creates a file folder called lp6000r, which contains:
■IMAGE folder
■MIBS folder
■README.text
Installing with Windows® NT. To copy software to an
1Insert diskette #1 containing the system software file into a disk drive. These instructions assume drive a.
2Choose Run from the File menu.
The Setup screen, with the system software name, and the Setup dialog box are displayed.
3At the command line in the Setup dialog box, enter a:setup and click OK.
A Welcome screen appears. You are prompted to continue or to cancel the installation. To continue, click Next. To cancel the installation and exit the Setup program, click Cancel.
You are guided through the rest of the installation procedure by the Install Shield Wizard.
This procedure creates a file folder called lp6000r, which contains:
■IMAGE folder
■MIBS folder
■README.text