Administering | A multicast tunnel allows multicast packets to cross several unicast routers |
Multicast Tunnels | to a destination router that supports multicast. A tunnel has two end points. |
| The local end point is associated with an interface on the LANplex router. |
| When you define the tunnel, you specify the associated index on the local |
| LANplex router and then the characteristics of the tunnel. Tunnel |
| characteristics are the same as those of an interface. You also specify the IP |
| address of the remote multicast router. |
| Not all multicast configurations require a tunnel. The only configurations |
| that require a tunnel are those that require a connection between two |
| multicast internetworks through one or more unicast routers. |
Displaying | To display the IP multicast tunnel(s) on the router, from the top level menu |
Multicast Tunnels | of the Administration Console, enter: |
|
|
|
| ||
system |
|
|
|
|
|
ethernet | interface |
|
|
|
|
dvmrp |
|
|
| ||
fddi | route |
|
|
| |
atm | arp | igmp | ➧display | ||
bridge | atmArpServerinterface |
| define | ||
➧ip | ➧multicast➧tunnel |
| remove | ||
ipx | udpHelper routeDisplay | ||||
appletalk | routing | cacheDisplay | |||
snmp | icmpRouterDiscovery | ||||
analyzer | rip |
|
|
|
|
script | ping |
|
|
|
|
logout | statistics |
|
|
|
|
|
|
|
|
|
|
ip multicast tunnel display
Example IP multicast tunnel configuration:
Index | Local Address | Remote Address Metric Threshold RateLimit State | |||
1 | 158.101.112.204 | 137.39.229.98 | 2 | 255 | 500 |
pkts in:320069 pkts out:0
peers 137.39.229.98 (3.8) (0xe)