6LANPLEX® 6000 EXTENDED SWITCHING SOFTWARE
Extended Switching Release 8.0.0 or greater of Extended Switching Software requires a Software minimum of 2 MB of memory on Ethernet/FDDI Switching Modules
Requirement (EFSMs). Memory configuration may vary. If you have an EFSM with 1 MB of memory, you can order a memory upgrade. Contact your sales representative.
To determine the amount of memory on the EFSM, you can either look at the lower ejector tab label or use the system display command from the top level of the Administration Console. EFSMs with only 1 MB of memory will have blank lower ejector tabs. EFSMs with minimum of 2 MB of memory have “2MB” on the lower ejector tab labels.
Release Highlights This release contains updated system diagnostics. for 8.0.2
Release Highlights This release contains the following items: for 8.0.1
■Support for IP routing on the FDDI Switching Module (FSM)
■Several problem fixes, which have been implemented at this release
Release Highlights This release contains the following items: for 8.0.0
■Support for the FDDI Switching Module (FSM)
■Support for the EFSM
■Support for RMON
■RMON MIB support
■State field added to interface display
■System menu item upTime added
■New FDDI MAC statistic rxErrors
■New fields added to FDDI MAC summary and detail displays
■Configurable Source Route hop count limit
■LANplex MIB support updates
■Bridge MIB support for the FSM
■New If MIB