3Com 6412M-25-TP manual Operation

Verifying Module		Operation
After	configuring	and saving 6412M-25-TP	module and port	settings,	you	can verify that
the	module is operating correctly by		viewing the LEDs	on the	front	panel:

The Port Status light should be lit (Green if no traffic, Yellow when traffic is p

The Module Reset LED should be off.

The Wrong Slot LED should be off.

Table 3-1 on page 3-8 provides a full description of the front panel LEDs.

Note: The 155M LEDs are reserved for future use.

Chapter 3. Configuration 3-7