3Com 7000HD manual Removing the 16MB Memory Simm

32MB Memory Upgrade Steps 2-5

Only use the special key provided if you have difficulty in removing the switch module.

Place the switch module on a grounded surface or antistatic bag with all components facing up.

Step 2 ￿Removing the 16MB Memory SIMM

The memory SIMM is located on the lower left corner of the module when the front panel is facing you. (Figure 2-5) On the top of the memory SIMM there are two metal spring clips (one on each side of

￿￿￿￿￿￿the SIMM) that hold the SIMM in place (Figure 2-6).

16MB Memory SIMM

Front Panel

Position of 16MB SIMM in CoreBuilder 7000HD Switch Module -

Front View