Inserting the 32MB Memory Simm

2-7

Removing the 16MB SIMM at a 45 Degree Angle

Step 3 Inserting the 32MB Memory SIMM

Remove the 32MB Memory SIMM from the packaging material.

Make sure that the front panel of the switch module is facing you, and that the switch is on proper grounding material, or an antistatic bag.

Make sure that you hold the SIMM as follows:

The cutout on the gold connector edge is facing the front panel

(Figure 1-2).

The SIMM is held at a 45 degree angle.

Insert the SIMM with its gold connector into the black connector at a 45 degree angle (Figure 2-9).