90CHAPTER 6: SWITCH MONITORING AND MAINTENANCE
Step 6: After you provide the required information, the system accesses the
Ethernet interface submenu again:
ETHERNET SUBMENU
1.Download file to SDRAM through ethernet interface and boot
2.Download file to Flash through ethernet interface
3.Download file to HardDisk through ethernet interface
4.Modify ethernet interface boot parameter
0.Return to main menu
Enter your
Step 7: At the prompt displayed in the last step, select a place for retaining the downloaded file (the Flash for example by entering 2), press Enter, and the system will display the following information in the terminal:
Attached TCP/IP interface to fei0. |
| |||
Attaching network interface lo0... | done. | |||
boot device |
| : fei0 |
| |
unit number |
| : | 0 |
|
processor number | : | 0 |
| |
host name |
| : | 8500 |
|
file name |
| : | 8500.app |
|
inet on ethernet (e) : | 1.1.1.1 |
| ||
host inet (h) |
| : | 1.1.1.2 |
|
flags (f) |
| : | 0x80 |
|
Prepare for loading | .... | OK |
| |
Loading | done |
|
|
|
flash:/s8500.app already exist, |
| |||
delete it?(Y/N):y |
|
|
| |
Deleting file |
|
| ||
|
| Done | ||
Free flash Space : 15862784 bytes |
|
Writing
Step 8: The information displayed in the last step means a successful file downloading operation. In this case, the system accesses the Ethernet interface submenu again and the user can make selection as needed. The details will not be covered here.
ETHERNET SUBMENU
1.Download file to SDRAM through ethernet interface and boot
2.Download file to Flash through ethernet interface
3.Download file to HardDisk through ethernet interface
4.Modify ethernet interface boot parameter
0.Return to main menu Enter your
Upgrading software through management Ethernet port (FTP)
1Introduction to FTP
The Switch 8800 Family applications can also be updated through the Ethernet port and using FTP.
Following is the upgrading procedure, using the Switch 8814 working as an FTP Client as an example.
2Upgrade procedure