Answering a Call 21
Changing Your
Password
You must use the Telephone User Interface (TUI) and change the local
password to match the password stored on the call processor by
following these steps:
1Press Program + 5 + 5 or press Feature 410 + 5 + 5.
The Display Panel shows:
Enter Password:
2Enter your new password and press #. The first digit of the password
cannot be zero (0). The minimum password length is 4 digits; the
maximum password length is 9 digits.
Answering a Call To answer an incoming call, lift the handset.
Alternatively, if you are using a 3Com 3101SP Basic Telephone, you can
press the speaker button.
If your telephone includes multiple access lines, press the Access button
for the line on which the new call is arriving (the light next to the bu tton
will be flashing).
Unanswered calls are sent to either your call coverage point which, by
default, is your voice mailbox or your configured call forwarding
destination. See Call Forwarding.
Answering a Second Call
When a new call arrives while you are on a call:
1Press Hold to put the current call on hold.
2Press the Access button for the line whose status light is blinking,
indicating a new call.
3To return to the earlier call, hang up the new call, or put it on hold, or
transfer it, and then press the Access button for the original call.
Making Calls This section describes standard dialing features.