Terminating Calls 23
To activate the one-call-only Class of Service Override from any
telephone:
1Pick up the handset.
2Press Feature + 433. The Display Panel prompts you for the required
input.
3Enter your telephone extension.
4Enter your password and press #.
5Enter the destination number as you would from your own telephone.
Terminating Calls You can terminate a call (hang up) by replacing the handset. Alternatively,
if the call is on Speaker, turn the Speaker off by pressing the button.
Using the Telephone Display Panel
The Display Panel shows the current date and time, and your extension
number. It can also show features that you have enabled. For example, if
you enable the feature that forwards all incoming calls to your voice
mailbox, the Display Panel shows Fwd Mail.
The Display Panel can also list telephone status messages, Caller ID
information (if enabled), and the number of new messages (voice, e-mail,
and fax) that you have in your mailbox.
If the Display Panel contains more than two lines of information, use the
up and down scroll buttons to navigate through the display.
The list of new messages in the Display Panel depends on the status of
each message. A new message can be:
■Unreviewed — An unreviewed message has never been listened to
or acted upon (saved or deleted).
■Reviewed — A reviewed message has been listened to but has not
been acted upon (saved or deleted). A message may reach this state if
you listen to the message and then hang up.
The Display Panel shows the number of messages in your mailbox (and
the Message Waiting Indicator is lit) only if you have at least one
unreviewed message. If you review the last new message and do not act
on it, the Display Panel shows the date and extension, and MWI is off. If
your mailbox then receives a new message, the Display Panel shows the