Activating Do Not Disturb 29
To mute the telephone ringer:
1Press Feature + 489. The LCD displays:
Ringer is now muted.
2To clear the display, lift the handset. The next time you receive an
incoming call, the ringer is muted.
3To turn this feature off, press Feature + 489 again. The LCD displays:
Ringer is now enabled.
4To clear the display, lift the handset.
Activating Do Not Disturb When you enable Do Not Disturb, incoming calls immediately go to the
call coverage point set by you or your administrator. The default call
coverage point is your voice mailbox.
When your telephone is in Do Not Disturb mode:
■An incoming call does not cause your telephone to ring. If you are
logged in to multiple telephones using the same telephone number
and one of the telephones enables Do Not Disturb, the feature applies
to all telephones, that is, an incoming call will not ring on any of the
telephones.
■You can use the telephone to dial outgoing calls.
■If you enable Do Not Disturb while one or more calls are ringing, the
pending calls are sent to your call coverage point and Do Not Disturb
is enabled for all subsequent calls.
■If you are a Ring Group member and you enable Do Not Disturb,
personal calls go to your call coverage point. However, Ring Group
calls always ring on a member’s telephone, regardless of the Do Not
Disturb setting.
To activate Do Not Disturb:
1Press Feature + 446.
You can also press Feature + 446 or press the Features Access button,
then scroll down the list of features and select Do Not Disturb.
Your telephone is now in Do Not Disturb mode and the display panel
shows Do Not Disturb.
2To disable Do Not Disturb mode, repeat Step 1. The Do Not Disturb
message disappears from the display panel.