Attaching and Adjusting the Support Bracket 49
If your telephone received its IP configuration automatically, follow steps
1 through 5 to set the IP address of the 3Com Asterisk Appliance. If your
telephone did not receive its IP configuration au tomatically from a DHCP
server, follow all the steps.
Note that these setting may be provided automatically by an address
server. See your network administrator for more information.
Attaching and Adjusting the Support Bracket
Figure5 , Figure 6, and Figure7 show a 3102 Telephone. The instructions
apply to all telephones.
Figure 5 Attaching the Support Bracket
1
2
3
To attach the support
bracket, 1, snap the
bracket into the
mounting supports 2,
on the bottom of the
telephone.
After you connect the
cables to the
telephone, press the
cables into the cable
management clamps 3,
on the stand.