Attach the mounting bracket to the T-bar clamp | 3Com AP3750

3Attach the mounting bracket to the T-bar clamp.

Universal mounting bracket

T-bar

Port connector opening

(Viewed from above ceiling tiles, looking down.)

Port connector	Universal mounting bracket
opening
	T-bar

840-9502-0005

4If you are using an external antenna, insert the antenna cable into the antenna connector on the access point.

5Insert the Category 5 cable through the port connector opening in the mounting bracket, then plug the cable into the access point.

TM

840-9502-0002

6Attach the access point to the mounting bracket

Lock

T-bar

840-9502-0006

7

Image 7

3Com AP3750 quick start Attach the mounting bracket to the T-bar clamp, Attach the access point to the mounting bracket

Contents

About This Guide AP3750 Managed Access Point Diameter 16.76 cm 6.6 inches Height 69 cm Inches 3Com AP3750 Managed Access Point Features RJ-45 Cable Ports Observing Safety Precautions Cabling Unpacking the Access PointPreparing for Installation Power Mounting the Access Point Connecting External Antennas Suspended Ceiling Flush Ceiling Tiles Cable Requirement Attach the mounting bracket to the T-bar clamp Attach the access point to the mounting bracket Bar Slide together Bar clamp halves Suspended Ceiling Installation Drop Ceiling Tiles 840-9502-0002 Point Bracket Junction Box Installation Attach the bracket to the junction box Point Template template Bracket bracket Solid Wall or Ceiling Installation Cable Universal mounting bracket 840-9502-0016 Lock Point Bracket bracket Tabletop Installation Configuring the Access Point Connecting the Access Point to a Switch Radio 2 LED Radio 1 LED Health LED Checking the LED Indicators USA-FEDERAL Communications Commission FCC EMC Compliance Regulatory Information Industry Canada IC RF Compliance Manufacturers FCC Declaration of Conformity Europe EU Declaration of Conformity Outras disposições da Directiva 1999/5/CE Allowed Frequency Bands Allowed Channel Numbers Countries Brazil RF Compliance